檢視 Ceph Maintenance/Shutdown 的原始碼

== Ceph Nodes Maintenance/Shutdown ==
1.
 ceph orch host ok-to-stop <host>
2.
 ceph orch host maintenance enter <hostname> [--force]
3.
 ceph orch host maintenace exit <hostname>
== Ceph Cluster Maintenance/Shutdown ==
1. Stop the clients
: using the RBD images
: using the Rados Gateway
2. The cluster must be in healthy state
: '''Important'''
3. Set OSD flags:
 ceph osd set noout
 ceph osd set nobackfill
 ceph osd set norecover
4. Pause cluster completely:
 ceph osd set norebalance
 ceph osd set nodown
 ceph osd set pause
5. Shutdown your service nodes one by one

6. Shutdown your OSD nodes one by one

7. Shutdown your monitor nodes one by one

8. Shutdown your admin node
== Start Ceph Cluster After Maintenance ==
1. Power on the admin node

2. Power on the monitor nodes

3. Power on the osd nodes

4. Wait for all the nodes to come up , Verify all the services are up and the connectivity is fine between the nodes.

5. Resume Ceph cluster:
 ceph osd set pause
 ceph osd set nodown
 ceph osd set norebalance
6. Unset all flags:
 ceph osd set norecover
 ceph osd set nobackfill
 ceph osd set noout
7. Check and verify the cluster is in healthy state

8. Verify all the clients are able to access the cluster.