「Raspberry Pi Unboxing」修訂間的差異
跳至導覽
跳至搜尋
行 45: | 行 45: | ||
* Download OpenWrt image for Raspberry Pi 5 |
* Download OpenWrt image for Raspberry Pi 5 |
||
https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=bcm27xx%2Fbcm2712&id=rpi-5 |
https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=bcm27xx%2Fbcm2712&id=rpi-5 |
||
⚫ | |||
* WaveShare SIM7600E-H-4G-HAT |
* WaveShare SIM7600E-H-4G-HAT |
||
https://www.waveshare.net/wiki/SIM7600CE_4G_HAT |
https://www.waveshare.net/wiki/SIM7600CE_4G_HAT |
||
wget https://www.waveshare.net/w/upload/2/29/SIM7600X-4G-HAT-Demo.7z |
wget https://www.waveshare.net/w/upload/2/29/SIM7600X-4G-HAT-Demo.7z |
||
− | sudo apt-get install p7zip-full |
+ | # sudo apt-get install p7zip-full |
7z x SIM7600X-4G-HAT-Demo.7z -r -o/home/openrich |
7z x SIM7600X-4G-HAT-Demo.7z -r -o/home/openrich |
||
sudo chmod 777 -R SIM7600X-4G-HAT-Demo |
sudo chmod 777 -R SIM7600X-4G-HAT-Demo |
||
mv SIM7600X-4G-HAT-Demo/Raspberry/c SIM7600X |
mv SIM7600X-4G-HAT-Demo/Raspberry/c SIM7600X |
||
+ | /home/openrich/SIM7600X/sim7600_4G_hat_init |
||
− | |||
+ | : nano /home/openrich/SIM7600X/sim7600_4G_hat_init |
||
+ | # pinctrl for Raspberry Pi 5 |
||
+ | pinctrl -e set 4 op dl |
||
+ | pinctrl -e set 6 op dl |
||
+ | ## raspi-gpio for Raspberry Pi 4 |
||
+ | # raspi-gpio set 4 op dl |
||
+ | # raspi-gpio set 4 op dl |
||
+ | ## sysfs for old |
||
+ | # echo "4" > /sys/class/gpio/export |
||
+ | # sleep 0.1 |
||
+ | # echo "out" > /sys/class/gpio/gpio4/direction |
||
+ | # echo "0" > /sys/class/gpio/gpio4/value |
||
+ | # echo "6" > /sys/class/gpio/export |
||
+ | # sleep 0.1 |
||
+ | # echo "out" > /sys/class/gpio/gpio6/direction |
||
+ | # echo "0" > /sys/class/gpio/gpio6/value |
||
+ | : nano /etc/rc.local |
||
+ | sh /home/openrich/SIM7600X/sim7600_4G_hat_init |
||
+ | exit 0 |
||
+ | |||
cd ~/bcm2835 |
cd ~/bcm2835 |
||
chmod +x configure |
chmod +x configure |
||
行 59: | 行 80: | ||
sudo make |
sudo make |
||
sudo make install |
sudo make install |
||
+ | |||
− | |||
sudo make clean |
sudo make clean |
||
sudo make |
sudo make |
||
sudo ./PhoneCall |
sudo ./PhoneCall |
||
− | * SIM |
||
− | * RS-485 |
||
− | * MQTT |
||
⚫ | |||
− | * SIM |
||
* RS-485 |
* RS-485 |
||
* MQTT |
* MQTT |
於 2024年11月21日 (四) 17:32 的修訂
樹莓派開箱
樹莓派 Raspberry Pi
- Raspberry Pi 5 Model B 2GB
- Raspberry Pi 5 Active Cooler
- Raspberry Pi 27W USB-C Power Supply
- Raspberry Pi microSD 32GB - Raspberry Pi OS (64-bit)
- Raspberry Pi microSD 32GB A2 V30 C10
- SIM7600CE Raspberry Pi 5 4G 模組 LTE Cat-4 擴充板
- Waveshare RS485 CAN HAT for Raspberry Pi 5
- 樹莓派主機板
- 4G 擴充板
- RS485 擴充板
- 4G 擴充板背面
樹莓派組裝
- 樹莓派主機板
- 主機板安裝散熱片風扇
- 主機板上層安裝 4G 模組
- 4G 模組右上方 GNSS IPEX 接出轉 SMA 接 GPS 天線
- 4G 模組下方 2組 4G IPEX
- MAIN 接出轉 SMA 接 4G 天線
- 4G 模組上層安裝 RS485 擴充板
- 右側面
- 上層上方 RS485 接線端子
- 中層下方 nanoSIM 插槽
- 下層下方 microSD 插槽
軟體測試
OpenWrt
- Download OpenWrt image for Raspberry Pi 5
https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=bcm27xx%2Fbcm2712&id=rpi-5
Raspberry Pi OS
- WaveShare SIM7600E-H-4G-HAT
https://www.waveshare.net/wiki/SIM7600CE_4G_HAT
wget https://www.waveshare.net/w/upload/2/29/SIM7600X-4G-HAT-Demo.7z # sudo apt-get install p7zip-full 7z x SIM7600X-4G-HAT-Demo.7z -r -o/home/openrich sudo chmod 777 -R SIM7600X-4G-HAT-Demo mv SIM7600X-4G-HAT-Demo/Raspberry/c SIM7600X /home/openrich/SIM7600X/sim7600_4G_hat_init
- nano /home/openrich/SIM7600X/sim7600_4G_hat_init
# pinctrl for Raspberry Pi 5 pinctrl -e set 4 op dl pinctrl -e set 6 op dl ## raspi-gpio for Raspberry Pi 4 # raspi-gpio set 4 op dl # raspi-gpio set 4 op dl ## sysfs for old # echo "4" > /sys/class/gpio/export # sleep 0.1 # echo "out" > /sys/class/gpio/gpio4/direction # echo "0" > /sys/class/gpio/gpio4/value # echo "6" > /sys/class/gpio/export # sleep 0.1 # echo "out" > /sys/class/gpio/gpio6/direction # echo "0" > /sys/class/gpio/gpio6/value
- nano /etc/rc.local
sh /home/openrich/SIM7600X/sim7600_4G_hat_init exit 0
cd ~/bcm2835 chmod +x configure ./configure sudo make sudo make install
sudo make clean sudo make sudo ./PhoneCall
- RS-485
- MQTT