CentOS Bonding LACP

了解網卡的狀態

nmcli device status
nmcli connection show

去除實體網卡設定

nmcli connection delete ens7

建立 bonding 網卡

nmcli connection add type bond con-name bond0 ifname bond0 mode 802.3ad

附掛實體網卡

nmcli connection add type bond-slave ifname eno3 master bond0

網卡設定

nmcli connection modify bond0 ipv4.addresses 192.168.1.210/24
nmcli connection modify bond0 ipv4.gateway 192.168.1.1
nmcli connection modify bond0 ipv4.method manual

啟動介面

順序從 Slave Interface 到 Bonding Interface

nmcli connection up bond-slave-eno3
nmcli connection up bond0

檢查 bonding 狀況

cat /proc/net/bonding/bond0

---